.. _emagCalcMultiPsid:

================================
**Psid and Psiq identification**
================================

.. admonition:: Call: Rotating Machine (r/phi-coordinate-system)

 Data for the **"Psid/Psiq identification"** procedure
 
 **Example for the call:**
 ::
  
  m.arm_length      =        100.000 --   Effect. armature length          [mm]
  m.num_pol_pair    =          2.000 --   Number of Pole pairs           (>= 1)
  m.npols_gen       =          1.000 --   Number of Poles simulated      (>= 1)
  m.speed           =       3000.000 --   Speed: rotate                 [1/min]
  m.skew_angle      =          0.000 --   Skew angle                  [Deg; mm]
  m.nu_skew_steps   =          0.000 --   No of skew sect: >0:finite;0:infinite
  m.num_par_wdgs    =          1.000 --   Number of parallel Windings    (>= 1)
  m.fc_radius       =         34.250 --   Radius air-gap center (torque)   [mm]
  m.maxid           =          0.000 --   Max value Id-current              [A]
  m.minid           =          0.000 --   Min value Id-current              [A]
  m.maxiq           =          0.000 --   Max value Iq-current              [A]
  m.miniq           =          0.000 --   Min value Iq-current              [A]
  m.delta_id        =          0.000 --   Delta Id                          [A]
  m.delta_iq        =          0.000 --   Delta Iq                          [A]
  m.nu_move_steps   =         49.000 --   Number of move steps
  m.range_phi       =        180.000 --   Move range angle
  m.phi_start       =          0.000 --   Start angle \n

  m.pocfilename    = 'xyz.poc'
  run_models("psd_psq_fast")