Calculation parameters

pre_models(“FE-contr-data”)

Determination of the basic parameters of the FE calculation and machine simulation.

Example and parameter description:

m.hc_min          =       95.0     --   Limit demagnetisa > 0:[
m.con_hdcopy      =       0.00     --   Hc-copy:Name:auto:0,intact:1, none:-1
m.b_max           =       2.40     --   Max Induction [T] in colorgradation
m.b_min           =       0.00     --   Move inside: 0 , Move outside: > 0
m.calc_fe_loss    =       1.00     --   Calcul. FE-Loss > 0, areas <0, no = 0, use FE-Losses Param = 2
m.eval_force      =       0.00     --   Eval. force density > 0, no <= 0
m.allow_draw      =       1.00     --   Draw Graphics :> 0: yes, 0:  no
m.fline_dens      =       1.00     --   F-Lines: 1: small, 2: medium, 3:thick
m.num_flines      =      10.00     --   Number of Field-lines:      < 100 > 2
m.name_bch_log    =       0.00     --   Name bch-file in Logfile:> 0:yes,0:no
m.st_size_move    =       0.00     --   Step size move: r/ph:[degr], x/y:[mm]
m.num_nonl_it     =       1.00     --   Number of nonlinear Iterations   < 99
m.perm_mode       =       0.00     --   Permeability mode:>0:restore,0:actual
m.error_perm      =      0.500E-01 --   Rel. Permeability error < 0.1     [
m.allow_demagn    =       0.00     --   Allow Demagnetisation:= 1:yes,= 0:no
m.maenergy        =       0.00     --   Force from magn energy 1 :yes,= 0:no
m.el_order_ag     =       1.00     --   El. order in air gap: lin=1: quadr=2
m.export_scrpt    =       0.00     --   Export parameters in script: yes > 0
m.intern_bndc     =       0.0      --   Intern. Boundary Conditions: yes > 0

pre_models("FE-contr-data")